| 高莲士,宋文晶,汪召华.高面板堆石坝变形控制的若干问题[J].水利学报,2002,33(5):0003-0009 |
| 高面板堆石坝变形控制的若干问题 |
| Discussion on deformation control of high CFRD |
| |
| DOI： |
| 中文关键词: 高面板堆石坝 填筑期坝体差异变形 施工临时剖面优化 分期面板浇筑高程 垂直缝三向变形 |
| 英文关键词: high CFRD differential deformation temporary construction section of rockfill dam optimization 3-D deformation peripheral joint |
| 基金项目: |
|
| 摘要点击次数: 3406 |
| 全文下载次数: 75 |
| 中文摘要: |
| 目前面板堆石坝的高度已从100m级发展到200m级，由于分期施工，高面板堆石坝的坝体变形性状更加复杂。本文以250m典型高面板坝为例，采用清华非线性K-G模型，分析了高面板坝的一些特殊变形问题，提出：优化施工临时剖面，以防止坝体在施工期出现过大的差异变形而产生裂缝；分期面板的浇筑高程要与堆石体的顶部保持一定的高差，以防止面板与支承堆石体间出现脱空；对高坝、特别是峡谷地区的高面板坝，要注意减少面板的法向变形，以控制坝肩附近周边缝和垂直缝的三向变形。 |
| 英文摘要: |
| A typical CFRD,250m in height, is analyzed as an example to study the possible special deformation problems happened to high CFRD. The K-G model developed by Tsinghua University is applied. It is concluded that :1) to prevent from cracking due to excess difference of deformation, the temporary cross section of the dam in different stages of construction should be optimized; 2) a certain elevation difference between the top of rockfill and top of concrete face plate must always be kept in the process of construction, to avoid from the occurrence of void between the embankment and face plates; 3) attention must be paid to the control of the normal direction defromation of face plates so that the 3-D deformations of the peripheral joints and adjacent vertical joints can be controlled. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |