贺益英,杨帆.洞塞消能工在火电核电厂排水口消能消泡中的应用[J].水利学报,2008,39(8): |
洞塞消能工在火电核电厂排水口消能消泡中的应用 |
Application of plug energy dissipater to elimination of bubbles in cooling water occurred to the outlet of power plants |
|
DOI: |
中文关键词: 消能消泡 洞塞消能工 物模试验 数模计算 应用实例 |
英文关键词: energy dissipation bubble elimination plug dissipater model test numerical simulation local resistance coefficient |
基金项目: |
|
摘要点击次数: 2750 |
全文下载次数: 837 |
中文摘要: |
从电厂排水口消能消泡消盐雾的机理出发,以模型试验和数值模拟等研究手段探讨了洞塞式消能工的流场和压力场等基本水力特性,获取了面积比0.4~0.8,相对长度比0.5~2.0的多种洞塞的局部阻力损失系数,并为工程应用提供了计算的经验公式。试验和计算结果表明,洞塞局部阻力损失系数随断面收缩比的增大而减小,随洞塞相对长度的增大而略有增大,其值约变化在0.5~6.0之间。此类型消能工对电厂排水口循环冷却水的消能消泡作用的有效性已通过一电厂有关工程的模型试验得到证实。 |
英文摘要: |
The plug energy dissipater is applied to eliminate the bubbles taken place to the outflow of power plant cooling water. The hydraulic characteristics of the dissipater are studied both by model test and numerical simulation based on k-ε two equation turbulence model. The variations of local resistance coefficient of the plug with plug area ratio ranging from 0.4 to 0.8 and relative plug length ranging from 0.5 to 2.0 are obtained and a simple empirical formula for calculating the coefficient is suggested. The validity of the numerical simulation is verified by model test result. The effectiveness of this type of dissipater is demonstrated by the model test for a typical project. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |