文章摘要
江伟,李国君,张新盛,华栋.离心泵蜗壳进口边对叶轮径向力影响的数值模拟[J].水利学报,2014,45(2):
离心泵蜗壳进口边对叶轮径向力影响的数值模拟
Numerical simulation of radial force on impeller in a centrifugal pump with different volute inlet edges
  
DOI:
中文关键词: 离心泵  蜗壳  数值模拟  径向力  蜗壳进口边
英文关键词: centrifugal pump  volute  numerical simulation  radial force  volute inlet edge
基金项目:
作者单位
江伟 西安交通大学热流科学与工程教育部重点实验室陕西西安710049 
李国君 西安交通大学热流科学与工程教育部重点实验室陕西西安710049 
张新盛 西安交通大学热流科学与工程教育部重点实验室陕西西安710049 
华栋 西安交通大学热流科学与工程教育部重点实验室陕西西安710049 
摘要点击次数: 2534
全文下载次数: 60
中文摘要:
      保证蜗壳过流断面面积和基圆直径不变,通过改变蜗壳进口边宽度,采用SST湍流模型分别对不同蜗壳进口边匹配同一叶轮离心泵进行全流道非稳态数值模拟。通过数值模拟分别得到不同蜗壳进口边的离心泵外特性及径向力特性,并对其进行分析。结果表明:适当改变蜗壳进口边对离心泵扬程、效率影响不大;同一工况下,叶轮上径向力的大小和方向时刻都在改变,且受叶轮与蜗壳动静干涉的影响呈现六角星分布,蜗壳上径向力呈现近似椭圆分布;较小蜗壳进口边的离心泵其叶轮和蜗壳上所受的径向力较小,说明较小蜗壳进口边能够改善离心泵的径向力。
英文摘要:
      Keeping constant of the current section of a volute and its base diameter, and changing the width of its inlet edge, this paper presents the unsteady numerical simulation through the whole flow passage of centrifugal pump with different volute inlet edges to match the same impeller by using SST turbulent model. The external characteristic of centrifugal pump and the radial force characteristic were obtained from the numerical simulation. The results show that appropriate changing of the volute inlet edges has little influence on head and efficiency of the centrifugal pump; the radial force of impeller changed with each passing minute in magnitude and direction under the same condition. Because of the influence of the rotor-stator interaction of impeller and volute, the radial force of impeller and volute presents the distribution of hexagonal star and ellipse, respectively. The smaller the volute inlet edge, the lesser the radial force on impeller and volute, which shows that decreasing volute inlet edge may improve the radial force on centrifugal pump.
查看全文   查看/发表评论  下载PDF阅读器
关闭